|
|---|
The Bostonian - $422 to $532
Model shown is 5 ft. oak - $ 527
|
The Bostonian features very ornate cast iron frames. This bench has twelve 1 x 3 inch nominal wood slats. These slats have eased edges and are pre-drilled for stainless steel hardware attachment. The wood slats are attached to the frame close together to form a very comfortable contour seat. This bench is available in 4 and 5 ft. lengths.
Liberty
- $435 to $575
The Liberty bench features a low profile cast iron frame. This bench has seven 2 x 4 inch nominal wood slats. These slats have eased edges and are pre-drilled for stainless steel hardware attachment. The standard length for this bench is 6 ft. utilizing a 3 frame construction for solid seating. Longer lengths are available upon request.
The Grand Central
- $588 to $1,000
The Grand Central Bench has twelve 1 3/8 x 2 1/2 inch wood slats. It is available in Treated Pine, Clear All-Heart Redwood, #1 Oak, Douglas Fir, Ipe, Mahogany, and Purpleheart. All wood members have eased edges and are pre-drilled for stainless steel hardware attachment. Top and bottom boards are eased to a large radius to conform to casting style. This bench is available in 4, 5, 6, and 8 ft. lengths. For lengths of 10 and 12 ft. a center casting is added.
World’s Fair
- $525 to $912
The World’s Fair bench features a rounded arm rest in its cast iron frame. This bench has 9 wood slats. Eight are full 1 x 2 1/2 inch. One slat is a full 1 x 3 3/8 inch. This slat is notched to fit the frame and form a contour. All wood members have eased edges and are pre-drilled for stainless steel hardware attachment. This bench is available in 4, 5, 6, and 8 ft. lengths. An additional casting can be added to make 10 and 12 ft. lengths.
The Baby Grand Deluxe Bench
- $519 to $558
All wood members have eased edges and are pre-drilled for stainless steel hardware attachment. Available in 4, 5, and 6 ft. lengths. Frames are connected by a 5/8 inch rod with acorn nuts.
The Grand Picnic Table
- $1,743 to $2,063
This massive picnic table is truly beautiful. The 6 wood slats in the table top are 2 x 6 inches nominal wood slats. All wood members have eased edges and are pre-drilled for stainless steel hardware attachment. The seats are Baby Grand Benches and are ordered separately. Available in the same woods as benches above and in 4, 5, and 6 ft. lengths. Frames are connected by a 5/8 inch rod with acorn nuts.
The Original Contour
- $505 to $797
The Original Contour bench features thirteen 3 x 3 inch nominal pressure treated pine slats with walnut brown oil stain, fastened to three 3/8 x 4 inch steel contoured straps. The two outside straps are welded to either a portable seagull leg or to a 2 1/2 inch square steel permanent base. This bench is available in 6 or 8 ft. lengths. Other woods available are 2 x 3 inch nominal Redwood, Oak, Purpleheart, and Ipe. Also available with arm rests.